The PLUS is where it's at!

The m.relay+ purposefully combines a load independent digital flasher relay and electronic push-button controls.

Depending on how long the respective turn signal push-button is activated, 4 different operating modes are available:

Change of lane: Short tap on push-button - blink 3x and automatic switch-off.

Turn: Pressing push-button shortly - blink 10x and automatic switch-offy.

Continuous flashing: Pressing push-button longer - switching off only after pressing the push-button repeatedly.

Additionally the m.relay+ is equipped with a hazard flasher function - activated by pressing both push-buttons simultaneously.

The m.relay+ is load independent (1-100 W) and provides a constant flasher frequency to almost all models of LED, micro or halogen turn signal lights as well as 10 or 21 W light bulbs. Immediate, loss free and brighter illumination results from the effective microelectronic.

The light and compact aluminium casing is anodized black and features a M3 mounting thread. Removable mounting with cable ties is also possible. Ideal for mods and custom bikes with restricted mounting space. The electronics are water-tight, vibration resistant and are equipped with an overload protection.

If you are looking for a flasher relay WITHOUT push-button controls please refer to our m-Flash or m-Wave series.

If you are looking for a flasher relay WITHOUT push-button controls but with automatic deactivation please refer to our m-Stop series

If you are looking for fully featured push-button controls with lots of additional features, please refer to our m-Unit series.
Advantages

Very compact, light and easy to mount
Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
No additional push-button control unit necessary
Intuitive time control and automatic deactivation
Almost load independent (min. 1 Watt)
Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electrical contacts
Consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
Immediate loss free and brighter illumination of all turn signal lights
Completely water tight and vibration resistant because of the moulded-in construction
Short circuit proof, automatic overload protection, switches power up to 100 W.
No heat generation while operating
Only 5 - 18 V operating voltage required
Quality 'made in Germany' - by motogadget