HT Italia HT4004 10/100A AC/DC Transducer Rigid Clamp

Key Features At A Glance

• Measures 0.1 A to 100 A AC/DC current across two ranges (10 A and 100 A)
• CAT III 600 V overvoltage category; complies with IEC/EN 61010-1 safety standard
• 1 V AC/DC maximum output signal into a minimum 10 kΩ external load
• Frequency range of 40 Hz to 1 kHz
• Accepts conductors up to 30 mm in diameter
• Powered by 2x 1.5 V AAA (LR03) alkaline batteries; approx. 3 days in continuous measurement
• 120 Arms overload protection (max 60 seconds) on the 100 A range

The HT Italia HT4004 is a 10/100A AC/DC transducer in a rigid clamp form factor. It measures current from 0.1 A to 100 A AC/DC and converts the measured current into a proportional low-level voltage output, with a maximum output signal of 1 V AC/DC delivered into a minimum external load of 10 kΩ. The output follows a fixed scaling ratio so the host instrument reads current as a clean voltage signal.

A clamp-style current transducer lets a user measure current without breaking the circuit, by closing the jaws around a conductor and sensing the field it produces. The HT4004 outputs a scaled voltage suitable for feeding a measuring instrument, and its accuracy is characterized for both DC and AC current as well as for AC power measurement at stated power-factor conditions.

ValueTronics supports the HT4004 from our own 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, where we stock and hold our inventory rather than sourcing to order.

Product Core & Specifications

Important: The clamp introduces a phase error of about 3 degrees, which adds approximately 3% rdg error on AC power measurement at cosφ = 0.866 and about 9% rdg at cosφ = 0.5.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.