Overview

Australian Valve Group (AVG) PTR15-850OL 850kPa 15mm (1/2") PTR pressure and temperature relief valve features an extended 200mm temperature sensor probe and is supplied with insulation jackets. The extended temperature sensor probe is neccessary when the PTR valve is separated from the water storage cylinder by a large distance due to fittings or accessories inbetween.

The PTR valve is designed to relieve the increase in pressure caused by water expansion during normal heating cycle. During the hot water services' heating cycles, the volume of water will expand as the temperature increases. This volume expansion creates excessive pressure inside the water cylinder and must be regulated. The AVG PTR valve is designed to regulate and relieve the pressure in hot water services by dripping in a controlled manner. 2-5L a day of dripping is normal, depending on the hot water usage and the amount of heating going into the water.

The AVG PTR valve is also a mechanical protection device for the hot water services. In rare occasions of faulty thermostat or heating element, the hot water service can overheat and build dangerously high pressures. When the AVG PTR valve senses this abnormally high temperature and pressure, it will dump large amounts of water in hundreds of liters for an emergency pressure relief.

A functioning PTR valve is a requirement by law in Australia for safety and the AVG PTR  valve is approved under the Watermark standard. The AVG PTR valve comes with an insulation jacket and allows for a professional look and minimal heat loss.

A PTR valve usually has a life span about 5 years and needs replacing if you notice excessive water leakage in a stream instead of a controlled dripping. The AVG PTR valve is cross compatible with many other brands such as Reliance, Tomson, Nefa and Reflex.

The AVG PTR valve fits perfectly with mainstream heat pump, solar, electric and gas storage water heater brands such as Rheem, Vulcan, Rinnal, Dux, Aquamax, Thermann, Apricus and Solahart. 

Technical Details

• Brand: Australian Valve Group (AVG)
• Model: PTR15-850OL
• Watermark License Number: 2639
• Expansion Rating: 10 kW 
• Pressure Rating: 850 kPa
• Temperature Rating: 99°C
• Thread Size: 1/2" BSP (15mm) Male MI thread and female FI thread
• Thread Size Physical Measurements: 20.995mm external male and internal female thread diameter (refer to the BSP sizing chart in the photo gallery)
• Insulation Jacket Included 
• Material: DR Brass
• Features: 200mm Long Probe (Physical measurement for the exposed section below the brass valve body thread)
• Intended Use: Electric tanks, solar tanks, gas storage tanks and heat pumps that require extra reach length from the temperature probe
• SKU: AVG-PTR15-850OL

Package Contents

• AVG PTR15-850OL 15mm (1/2") 850kPa PTR Valve with 20cm Long Probe
• Package Weight: 410g