Brand: Kidde

Color: White

Features:

• Provides protection from fire and carbon monoxide in one unit with Photoelectric sensor.
• Fire warning - The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “Fire Fire” The alarm will repeat pattern until unit is reset or smoke is eliminated.
• Carbon monoxide warning - Four short alarm beeps followed by a verbal warning “Warning, Carbon monoxide” This continues until the unit is reset or the CO is eliminated.
• Low battery warning - One chirp followed by warning “low battery”. The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The “low battery” warning will only sound once every fifteen minutes. Voice Hush Indication: “Hush activated” and “Hush cancelled” voice announcement
• Alarm memory - The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a concentration of CO. If the alarm has detected a CO level of 100ppm or greater, when the test/reset button is pressed the unit will announce “CO previously detected”. If the alarm has detected abnormal levels of smoke since its last test, it will produce three rapid beeps.
• AC-Wire with battery backup, An included 9V battery protects during short-term power outages
• Front-loading battery with unique battery door design
• Voice warning with green and red LEDs
• Photoelectric smoke sensor – May detect visible fire particles associated with slow smoldering fires sooner than an ionization sensor.
• Tamper resistant

Binding: Tools & Home Improvement

model number: 21007624

Part Number: 21007624

Details: Amazon.com

Kidde Photoelectric Combo Alarm view larger Alarm placements view larger Firex 21007624 AC Wire-in Combination Carbon Monoxide & Photoelectric Smoke Alarm with Battery Back-up
The Firex Front-Loading Smoke and Carbon Monoxide alarm by Kidde (part # 21007624) offers protection from two hazards – fire and CO – in one unit. This AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire! Fire!” or “Warning! Carbon Monoxide!”. The uniquely designed frontloading battery compartment makes battery replacement quick and easy, and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. Consumer benefits
A combination alarm provides a 2 in 1 protection against fire and carbon monoxide. Properly installed and maintained, smoke alarms are one of the best and least expensive ways to provide early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting residents to a fire hazard. Sensor Technology
This alarm uses a photoelectric sensing technology that detects visible particles associated with smoldering fires sooner than ionization alarms. Ionization alarms detect invisible fire particles associated with flaming fires sooner than photoelectric alarms. Kidde recommends that both types of alarms be installed inside the home to protect against both types of fires. Smoke Alarm Tips
Install smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. On average, families have less than three minutes from the time the first smoke alarm sounds to escape a fire. The sooner you hear an alarm, the more time you will have to get out. What's in the box
One single Firex 21007624 AC Wire-in Combination. At-a-glance Offers protection from 2 hazards, fire & CO, in 1 unit AC wire with battery back-up alarm emits a beeping tone followed by voice warning Front loading battery compartment makes battery replacement quick & easy Manufactured by Kidde with photoelectric sensors for detecting smoke & fire Alarm includes the world's most accurate CO sensing technology

Product Description

The Kidde Front-Loading Smoke and Carbon Monoxide alarm (part 21007624) offers protection from two hazards – fire and CO – in one unit. Sold under the FireX brand, this AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire Fire” or “Warning Carbon Monoxide”. The uniquely designed frontloading battery compartment makes battery replacement quick and easy, and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. Architectural and Engineering Specifications - The combination smoke and carbon monoxide alarm shall be Kidde Unit Number KN-COPE-I (part number 900-0213) or approved equal. It shall be powered by 120VAC, 60Hz source with a 9V battery backup. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 5% - 95% relative humidity. The unit shall incorporate a photoelectric smoke sensor with nominal sensitivity of 2.05%/ft. The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Single and Multiple Station Carbon Monoxide Detectors. The unit shall qualify for UL-approved wording on the package: “World’s Most Accurate Carbon Monoxide Alarm”. The combination alarm can be installed on the surface of any wall or ceiling following the UL/NFPA/Manufacturer’s recommended placement guidelines. The alarm can be installed on any standard single gang electrical box, up to a 4”octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. No additional pieces shall be required to activate this feature. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The alarm shall include a test button that will electronically simulate the presence of smoke and CO and cause the unit to go into both modes of alarm. This sequence tests the unit’s electronics to ensure proper operation. The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding l

EAN: 0047871076246

Package Dimensions: 5.9 x 5.9 x 2.2 inches

Languages: English