The FIR Universal Grippy Seat Cover is designed for ultimate control and durability, offering 100% grip and 100% waterproof protection to withstand the toughest MX and Enduro conditions. Tested and approved by professionals, it ensures superior traction in all weather conditions. With a universal fit (1000mm x 466mm). Available in 8 vibrant colors, this high-performance seat cover not only enhances your ride but also adds a stylish touch to your bike. Ride with confidence and control, no matter the terrain!

Fitting Instructions

1. Remove the old seat cover completely.
2. Ensure the seat foam is dry and clean before installation.
3. If using a light-colored cover (e.g., white or pink), remove or cover any dark marks on the foam to prevent them from showing through.
4. Start at the front—pull the cover tight and staple it securely underneath the seat base.
5. Move to the rear, pulling the cover snug to eliminate wrinkles, then staple it in place.
6. Work side to side, stretching evenly and stapling every 2-3cm for a smooth, wrinkle-free fit.
7. Trim any excess material carefully using scissors or a utility knife.
8. Inspect for wrinkles or uneven tension—if needed, remove a few staples, adjust, and re-staple.
9. For deeper seats, achieving a perfect, tight fit may require a few attempts—take your time for the best results.